Men have been using orthopedic devices to enlarge the penis for more than a decade and they have proven to be positive. The most commonly used device is called an extender, which translates from English as an expander or filler. This fully reflects its purpose. It is characterized by simplicity of design and assembly, allowing men to use both a purchased (factory) extender and a homemade one. It's pretty easy to do. The main thing is to have the necessary materials and basic knowledge about the mechanics of the intimate device.
Types and effect of extenders.
The device works on the principle of proliferation of cavernous bodies. This occurs under the condition of regular tension of the tissues due to the periodic unwinding of the shafts in the direction of increasing length. The growth of new tissues does not stop; cells divide under the constant influence of the distracting force.
Average growth rates, according to user and manufacturer reviews, are an increase in length of 2 to 5 centimeters over a period of 6 to 10 months. You should not expect instant results. Patience and regular use of the extender will be required. Violation of this recommendation will result in the inability to achieve the desired effect.
Depending on the fixation method, extenders are divided into several types. When you plan to assemble a homemade version, you need to understand how they differ from each other.
vacuum extender
The circumference is made using a special vacuum chamber. It covers the head of the penis between 3 and 7 centimeters in circumference. It is considered the most reliable and safe. The risk of injury is reduced to practically zero, since there is no risk of compression.
Extender to enlarge the penis
Loop and Strap Extender
The fixing mechanics are almost the same, but the way of fixing is different. In the first case a loop is used and in the second a strap is used. The difference gives these species a significant difference.
The strap is lined with gauze, so the degree of compression is minimal. The loop, on the other hand, can strongly compress the head, cutting off the blood supply to the reproductive organ, but it remains the most common option.
How to make an extender with your own hands at home?
You can make any of the three types of gadgets listed. The most difficult to make will be the vacuum one because you will have to make a chamber. Otherwise, the process will not have significant differences.
Drawings
Make a schematic diagram of the device yourself. To make a drawing, it is enough to study the design of any well-known manufacturer. From a photograph, drawing, video, they outline their sketch. The length of the side posts is selected depending on the desired result. It can vary from 20 to 25 centimeters.
Necessary materials and tools.
A homemade extender at home is assembled from the same parts as the factory one. The specific materials depend on the type of structure being assembled:
- The stop ring, straps and loops are in direct contact with the skin and should not cause an allergic reaction. This imposes certain requirements on the material. The ring can be made of thick cardboard, hypoallergenic plastic, or plastic without sharp corners. Its internal diameter should be 2-3 mm larger than the cross-sectional width of the penis. It is best to use a sterile bandage before use, which is changed each time.
- The slats (side bars) are selected so that they can fix the required length for a long time. They can be matrices, rods, chrome spokes.
- The vacuum chamber and bulb must be sealed. If this condition is not met, such a homemade product will not work.
The difference between the devices lies in the fixing element. If you decide to make a variety with a camera, you should give preference not to a plastic bottle, as some sources say, but to purchase a special jar. These are sold in pharmacies. This guarantees the creation of an internal vacuum.
Schematic homemade extender.
Step-by-step assembly instructions.
Making a strap or loop device involves performing the following sequence of work:
- A piece with a diameter of 11 cm is cut from a piece of plywood or other material no thicker than 10 mm. A hole with a circumference of at least 5. 5 cm is made inside. Other dimensions are determined by the cross section of. the penis
- The length of the rods is 20-30 cm. They are screwed completely to the plywood, leaving a little on top. The entry places are filled with glue.
- They screw a "lamb" to each one.
- Strips are cut from a thin metal plate and holes are made in them.
- A clamp made of soft tubes or a strap is inserted into the holes, which can be used as wide medical tourniquets.
- Check the reliability of the fixation.
The assembly of the vacuum variety only differs in that a jar with a pear is attached to the end. Not everyone has such a device at home, but it is freely sold in city pharmacies. The radius ranges between 13 and 25 mm. It is selected depending on the size of the reproductive organ. The tightness of the clamp is ensured by a rubber sleeve. Its length must be at least 6 cm. It can be made of elastic surgical gloves.
The air will be pumped thanks to a bulb or a connector with a hose. You can use the tonometer element. The shut-off valve is unscrewed and inserted from the other end. This allows you to change the principle of operation. The bulb will start pumping instead of pumping air. As you can see, you'll have to play with more than just a strap and loop device.
To help you understand the principle of assembling an extender with your own hands at home, a video will help you, which clearly shows how the elements are connected, as well as what materials they are made of.
Extender for penis enlargement - tied below the knee
How and when to use it?
The indication for using the device is the small size of the device (10-12 cm). This length is not a "reference" length. The man decides for himself if he is satisfied with his reproductive organ or if he wants to have more. To increase the size of the phallus, it is necessary to use a homemade or factory-made device for at least 4 to 6 hours a day. The design allows you to hide the extender under clothing. People around you won't notice anything.
Instructions for use of the stretcher:
- The circle is placed over a slightly erect penis. The ring should fit perfectly on the pubic bone.
- The foreskin is retracted and a camera, loop, or strap is attached to the glans. It is necessary to ensure that the blood flow has not been interrupted (no excessive pressure, changes in the tone of the integument).
- Adjust the length of the rods. There should not be any painful sensations. The parameter is increased gradually, allowing the organ to get used to the degree of tension, that is, the phallus is trained.
When possible, massage the penis every hour. This allows it to quickly adapt to loads. After the allotted time, the device is removed and the pulp is kneaded with special intimate creams. The device is thoroughly disinfected each time and placed in clean packaging for storage.
Advantages and disadvantages of homemade structures
The advantages of a homemade stretcher include the following parameters:
- the opportunity to try the stretcher without having to purchase any device;
- relative cheapness;
- obtaining a design that fully corresponds to the parameters of the phallus.
In reality, there are very few advantages. There are more disadvantages. These include the drawback of the product, since it is quite difficult to independently assemble a model that ideally turns, puts on, takes off and does not press anywhere or slip.
Which extender is better, factory or homemade?
To answer this question, it is enough to compare the two types of models:
- A homemade product weighs much more than factory models. This leads to the need to adjust the rods each time for a long time so that they do not compress the head of the penis. Another point is that it is quite difficult to make a vacuum model. By the way, it is usually less effective than homemade ones with a loop and leash.
- Cost, which was cited as an advantage, is a relative advantage. Today there are Chinese models that cost 1 to 3 thousand rubles. This is no more expensive than a homemade extender. Nobody will sell half a meter of hairpins or 20 centimeters of textolite. You will have to buy a lot more material that will sit idle. This makes assembling the device with your own hands profitable only when you already have everything you need.
- The simplified design of a self-assembled device is not an advantage, but a disadvantage, since it will be inconvenient to use. You have to spend a lot of time putting it on and taking it off, and considering that self-massage is periodically recommended, it is also less effective.
One conclusion can be drawn: the factory device is better. To try this penis enlargement method, you can simply purchase an inexpensive model.
What risks may there be when using a homemade device?
Experts and experts do not recommend mounting an extender yourself without proper skills. If the device turns out to be "clunky", presses, presses, causes discomfort, it is not recommended to use it. This can have unpleasant consequences.
homemade extender
A well-assembled device will not be inferior in efficiency to a factory one. It will only be aesthetically unappealing. Otherwise there will be no difference, but there is also a nuance here. Many users write that with prolonged use bruises, compactions and irritations form in the dermis.
This may be due to low quality materials. Finding medical silicone in a pharmacy is almost impossible. If one is sold, its properties leave much to be desired and with prolonged contact negative consequences begin to appear.